Topography of MUGIC®

1. LED 1: Charging Status (Green/Red)

   • Red: indicates that device is charging when connected to USB.

   • Green: indicates that charging is complete.

2. LED 2: Battery Status (Green/Orange/Red)

   • Green: 80+% power remaining.

   • Orange: more than 40%.

   • Red: less than 40%.

   • Blinking Red: less than 10% power remaining.

3. LED 3: Wi-Fi/Bluetooth Status (Blue/Purple/Green)

4. USB-C Connector:

   • We recommend to charge MUGIC® before use (this will take approximately 2 hours). The device may require at least 5 minutes of charging before being able to be powered on, if the power is critically low.

5. Mode Button:

   • Press button for 2 seconds to switch MUGIC® between Wi-Fi AP (default) and Client modes.

6. Reset Button:

   • Insert toothpick and press for 5 seconds to reset MUGIC® to default configuration. All LEDS will blink RED to indicate reset. When MUGIC® is restarted, Wi-Fi mode remains the same (AP or Client) as it was before it was restarted.

7. Power Button:

   • Press button for 2 seconds to turn MUGIC® on and off.