> For the complete documentation index, see [llms.txt](https://mugic-motion.gitbook.io/mugic-r-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://mugic-motion.gitbook.io/mugic-r-documentation/about-mugic-r/topography-of-mugic-r.md).

# Topography of MUGIC®

<figure><img src="/files/PQB0b4xy3M4izwdkVgxb" alt=""><figcaption></figcaption></figure>

1. &#x20;**LED 1: Charging Status (Green/Red)**

   •   Red: indicates that device is charging when connected to USB.

   •  Green: indicates that charging is complete.
2. **LED 2: Battery Status (Green/Orange/Red)**

   •   Green: 80+% power remaining.

   •   Orange: more than 40%.

   •   Red: less than 40%.

   •   Blinking Red: less than 10% power remaining.
3. **LED 3: Wi-Fi/Bluetooth Status (Blue/Purple/Green)**
4. **USB-C Connector:**

   •   We recommend to charge MUGIC® before use (this will take approximately 2 hours). The device may require at least 5 minutes of charging before being able to be powered on, if the power is critically low.
5. **Mode Button:**&#x20;

   •   Press button for 2 seconds to switch MUGIC® between Wi-Fi AP (default) and Client modes.
6. **Reset Button:**

   •   Insert toothpick and press for 5 seconds to reset MUGIC® to default configuration. All LEDS will blink RED to indicate reset. When MUGIC® is restarted, Wi-Fi mode remains the same (AP or Client) as it was before it was restarted.
7. **Power Button:**

   •   Press button for 2 seconds to turn MUGIC® on and off.<br>

<br>